Yes, you can reduce the number of coats required by using the TC Ceramic high build (“HB”) formula. The HB formulation is engineered to be applied in much thicker layers than the standard formula, thereby accelerating the overall application process while still delivering excellent insulation and protective properties.

Key Benefits of the HB Formula:

  • Thicker Coats:
    • With the HB formula, you can apply each coat at thicknesses ranging from 30 mils (0.4mm) up to 60 mils (1.6mm). This allows you to cover more surface area with each application, reducing the total number of coats needed.
  • Efficiency and Cost Savings:
    • Fewer coats mean a faster installation process, less labor, and lower overall project costs. This is particularly advantageous in industrial applications where downtime must be minimized.
  • Seamless Application:
    • The HB formula is compatible with the same spraying equipment used for the standard formula, making the switch straightforward without requiring new tools or techniques.

Important Considerations:

  • Curing Times:
    • Thicker applications require careful attention to curing. Typically, a curing period of 24 to 48 hours between coats is recommended, depending on ambient temperature and humidity.
  • Environmental Conditions:
    • Optimal results are achieved in warm, low-humidity conditions. Lower temperatures or higher humidity may necessitate adjustments to the application technique to prevent sagging.

By using the high build HB formula, you can streamline your coating process and achieve robust insulation with fewer coats, saving both time and resources without compromising performance.